干式冷却系统

Dry Cooling Technologies

Dry cooling technology, both air-cooled condensers (ACC) and air fin coolers (AFC), represent an increasingly substantial portion of B&W SPIG’s global technology applications, as water preservation is becoming a priority for plant owners and operators.

This environmentally sound technology features no hot water discharge and requires little maintenance.

 

Environmental Benefits

Dry cooling technology provides many environmental benefits. SPIG dry cooling solutions are well suited for use in several important applications such as waste-to-energy, biomass and solar power plants. We are committed to the preservation of our environment and promote the use of this high-efficiency technology in a growing variety of applications.

Maintenance of dry cooling equipment is highly economical. Because there are few moving parts, probabilities of failure are much lower. Dry cooling can perform in almost any climate condition, from hot and humid to extreme cold environments, with diversified configurations that may be easily adapted to specific needs.

The absence of water loss and the limited fouling and fluid contamination within the equipment make SPIG dry cooling solutions a sound choice for an environmentally friendly approach to cooling in plants all over the world.

Air-Cooled Condensers

Air-cooled condenser (ACC) technology is installed in power plants to condensate the turbine exhaust steam. The system provides cooling using only the ambient air without any need for water. In this system, exhaust steam from the turbine flows counter-currently through the tube bundles of an ACC and is condensed in parallel flow tube bundles using air flow induced by axial fans.

B&W SPIG offers design, engineering, manufacture and installation of ACC systems suitable for renewable (waste-to-energy, biomass, solar, etc.) and thermal power plants.

Features of B&W SPIG ACC

- Flexible layout arrangements, including:
Low noise solution
Wide range of regulation suitable for steam export and district heating plant
Wind mitigation solution
- Options for multi-row tube bundles or single-row aluminum fin tube bundles

Air-cooled condenser (ACC)

Advantages of single-row aluminum fin tube bundles include:

  • Lower pressure drop (steam-side and air-side)
  • Higher thermal efficiency
  • No dead zones
  • Lower fan power consumption
  • Lower sound levels
  • Lower weight per surface area
  • Higher corrosion resistance


Air Fin Coolers

Air-cooled heat exchangers, also known as air fin coolers, are a cost-effective solution using air to cool process fluids. Air fin coolers are typically used in process industries such as oil and gas, steel plants, petrochemical, refineries, power plants, waste-to-energy plants, and chemical processing.

B&W SPIG provides cost-effective designs to meet the required thermal performances and to ensure the best efficiency in thermal and mechanical pressure part designs, steel structure and noise management.

We can provide the following types of finned tubes:

  • G-Fin (embedded): this high efficiency finned tube is designed for high thermal or mechanical stress, with an upper temperature limit of about 400C.
  • L-Fin (wrapped): this finned tube is designed for low temperature applications where tube corrosion protection is required. The upper temperature limit is about 130C.
  • Other finned tube types such as galvanized fin tubes and extruded fin tubes, are also available.

Air fin coolers (AFC)

Hybrid Cooling Systems

B&W SPIG also provides solutions for environmentally friendly wet/dry (hybrid) cooling towers. Hybrid Cooling Systems are the optimal solution for plume abatement and water saving.

新建

Babcock & Wilcox (B&W) projects, new build
从新设备到大型复杂化全方位工程与施工项目,我们一致展现出为客户成功执行创新性解决方案的能力。

升级/改装

Upgrades and Retrofits by B&W
改造、完善和维护现有设备是对各项运营的长期可行性和收益性至关重要的考虑因素。

部件/服务

Babcock & Wilcox Parts and Service Support
位于世界各地的区域服务中心、现场服务工程师和技术支持人员网络触手可及,可根据您的需求为您提供定制服务和售后解决方案。