Search Results

Vattenfall AB

The B&W Renewable Service delivery included project management, engineering, procurement, manufacturing and replacement of an economizer for a waste-to-energy boiler (Line 1) in Uppsala, Sweden. Also included in the project was to replace panel walls including cladding with Inconel® 625 on site.

View Web Page

Tekniska Verken i Linköping AB

Babcock & Wilcox Renewable Service replaced the panel walls at Gärstadverket P4, Sweden. Scope of delivery included project management, engineering, design, purchasing, manufacturing, delivery, disassembly, assembly/installation, testing, commissioning, trial run and documentation. The scope of work was a comprehensive replacement of the boiler panel walls.

View Web Page

Stockholm Exergi AB

Babcock & Wilcox Renewable Service provided detail design, engineering, procurement, manufacturing and replacement of the existing economizer at Högdalen waste-to-energy boiler in Stockholm, Sweden.

View Web Page

Sundsvall Energi AB - Sweden

B&W Renewable Service won this project for onsite Inconel® cladding and combustion air upgrade at Korstaverket in Sundsvall, Sweden. The client also requested the possibility to increase the capacity of the boiler. We also performed a computational fluid dynamics (CFD) model and recalculated all boiler parameters.

View Web Page

Tekniska Verken i Linköping AB

B&W Renewable Service scope of supply for this project included project management, engineering, design, purchasing, construction and documentation for onsite Inconel® cladding at boiler panel walls on an existing waste wood-fired boiler (Line 3) in Linköping, Sweden. The cladding was performed in the bottom portion of the first pass, including part of the rear, left, right and front walls.

View Web Page

Karlskoga Energi AB

For this project, B&W Renewable Service replaced the front boiler wall and economizers 1 and 2, as well as installed a new rapping device system for cleaning of the heating surface on a waste-to-energy plant (Line 1) in Karlskoga, Sweden. Delivery included project management, construction, design, manufacture, delivery, dismantling, installation, commissioning, testing and documentation.

View Web Page

MEC – BioHeat & Power

B&W Renewable Service scope of supply for this project included project management, engineering, manufacturing, delivery, disassembly, installation, commissioning, testing and documentation for the replacement of the wet slag conveyor and grate siftings conveyor on both boiler lines 1 and 2 for the MEC waste-to-energy plant.

View Web Page

SNCR Case Study

B&W Renewable helped WtE CHP plant in Sweden improve plant operations and reduce NOx and CO2 emissions.

View Web Page

Energnist Case Study

Energnist on 18-month intervals: We save three weeks every three years
Every three years, Energnist gains three weeks of operation and saves the costs of preparing for the maintenance shutdown. One and a half years between maintenance shutdowns can provide benefits if thoroughly prepared.

View Web Page

Open-Bottom Bubbling Fluidized-Bed Technology Case Study

Bubbling fluidized-bed (BFB) systems are attractive when wide fuel flexibility is required, and for firing high moisture and lower heating value fuels. B&W’s solution – an open-bottom bubbling fluidized-bed unit, was the first such B&W design in North America.

View Web Page
1
2
3
4
5
6
7
8
9