Pulverizer Training

Pulverizer Training

July 13-16, 2020 - Akron, Ohio

We're finalizing all the details - check back soon.

About the Seminar

Seminar Dates:

July 13-16, 2020

Seminar Description:

This seminar features separate tracks for B&W Roll Wheel, E/EL pulverizer, and CE training and includes a tour of B&W’s Copley service center.

Who Should Attend?

This seminar is designed for operators, engineers and maintenance personnel who need familiarization with the design, operation and maintenance requirements of pulverizers, including the B&W Roll Wheel E/EL pulverizers, and/or CE mills. Although some topics are engineering-oriented, participants without an engineering degree can greatly benefit from this seminar.

Earn Continuing Education Units (CEU)

Babcock & Wilcox (B&W) is offering each attendee the opportunity to earn CEUs through The University of Akron’s UA Solutions Program. A CEU is a unit of credit for participation in an accredited program designed for professionals with certificates or licenses to practice various professions. One contact/training hour equals 0.1 CEU.

This seminar is worth 1.6 CEU or 16 PDH.

Roll wheel and E/EL pulverizers training

Speakers

Andrew Jackson

Andrew Jackson, P.E., works in the B&W Global Parts & Services Group for Pulverizers, Burners and FPS Ignitors.

Andrew is a Mechanical Engineer with Field Engineering experience on B&W boilers, pulverizers, burners and ignitors, and root cause analysis of pulverizer problems and failures. Andrew has been presenting and training on B&W Roll WheelTM and E/EL pulverizers since 1990. He has been working in Field Service, Pulverizer Design, International Project Engineering, and Replacement Parts since 1977 and was a co-contributor for two pulverizer patents.

Mark Peruski

Mark is a graduate of the University of Michigan and has been with Babcock & Wilcox for 40 years, mostly in the field. He has worked extensively on both the operational and mechanical aspect of pulverizers. Mark worked with coals ranging from Eastern Bituminous coal to Powder River Basin coal. He also has extensive experience with fluidized bed boilers and stoker fired boilers. He holds a patent for a fluidized bed combustion system.

Lamar Benton

Lamar Benton is a Field Service Engineer for Babcock & Wilcox with more than 22 years of field experience. He specializes in the service and optimization of CE/Alstom pulverizers (RB, RS, RSP, HPS, and HP series), as well as general stoker-fired boiler operational expertise.

Eric Fuller

Eric has over 22 years of pulverizer and fuel preparation experience at B&W and one patent titled “System for Controlling Coal Flow in a Coal Pulverizer.” Eric spent the first eight years in Pulverizer Graphics working with designers and engineers refining the pulverizer product and bringing new ideas to fruition. Eric then spent two years with B&W’s Field Service and his time was spent doing pulverizer rebuilds and upgrades at sites across the United States. Installing rotating throat assemblies are what he remembers most after completing a lot of the drawings used during his time in Pulverizer Graphics. He cites thoroughly understanding the design of the products in his success with installing the products in the field.

Eric then transferred to Pulverizer Design Engineering where he spent lots of time designing new pulverizer products for the replacement parts business and a completely new design for the B&W-118 Roll Wheel Pulverizer. Eric has experience with just about every facet of the pulverizer and has been mentored by some of the best pulverizer engineers in the industry.

Eric spends a lot of his time at B&W’s service center advising on gearbox rebuilds, quality issues with parts and other assembly procedures that the shop may have questions on. He is also involved with the competitor parts initiative. His most gratifying experience was installing the product he has a patent on, seeing it operate correctly and achieving the targeted numbers predicted.

Agenda

Our agenda is still a work in progress. Exact times are subject to change.

DAY 1 - MONDAY, JULY 13, 2020

6:00-9:00 pm | Welcome Reception (Hilton Garden Inn Akron)

DAY 2 - TUESDAY, JULY 14, 2020

7:00 am | Breakfast

8:00 am | Welcome and Safety Share

8:15 am | Introduction to Pulverizers and Operations

10:00 am | Break

10:15 am | Tracks Begin (Track 1: Roll Wheel | Track 2: EL Pulverizers | Track 3: CE Mills)

12:00 pm | Lunch

1:00 pm - 3:15 pm | Tracks Resume

3:30 pm | Depart for Tour

5:30 pm | Dinner

DAY 3 - WEDNESDAY, JULY 15, 2020

7:00 am | Breakfast

8:00 am - 12:00 pm | Tracks Begin

12:00 pm | Lunch

1:15 pm - 4:30 pm | Tracks Resume

5:00 pm | Dinner

DAY 4 - THURSDAY, JULY 16, 2020

7:00 am | Breakfast

8:00 am - 11:30 am | Tracks Begin

11:30 am | Adjourn - Boxed Lunch

Location & Tuition

Training and Hotel Location:

Hilton Garden Inn Akron
1307 E. Market Street, Akron, OH 44305
(330) 733-2900

After registration submission, you will receive a confirmation email with additional hotel information. Hotel room cost is not included in the registration fee and is paid separately by the attendee.

Discounted hotel block rate is $119 per night plus taxes
Please ask for Babcock & Wilcox's discounted block rate

Training Cancellation Policy:

Registrants may cancel by June 22 for a full tuition refund. Cancellations received after this date will be charged 50% of the registration fee.

Pricing & Inclusions

EARLY BIRD

$995
ends June 29th

ADVANCED

$1,045
ends July 12th

ONSITE

$1095

Registration includes:

Admission to speaker presentations: technical information from industry experts designed to enhance job performance and overall facility efficiency
Transportation to/from hotel to the training location and offsite meals. (Participants are responsible for their own airfare, hotel accommodations, activities outside the event, etc.)
Meals during the seminar (Includes breakfast, lunch, and dinner)
A copy of the 42nd Edition of Steam/its generation and use
Personal seminar binder with printed copies of the presentations

FAQs

What can the pulverizer training seminar offer me? + –

This seminar features separate tracks for B&W Roll Wheel, E/EL pulverizer, and CE training and includes a tour of B&W’s Copley service center.

When is the pulverizer training seminar? + –

The pulverizer training seminar will be held from Monday, July 13 - Thursday, July 16, 2020

Can I receive continuing education units or professional development hours for attending this seminar? + –

Yes. B&W is offering each attendee the opportunity to earn CEUs through The University of Akron’s Workforce Training Solutions Program. A CEU is a unit of credit for participation in an accredited program designed for professionals with certificates or licenses to practice various professions. One contact/training hour equals 0.1 CEU.

For this ESP seminar, you can receive 1.6 Continuing Education Units (CEUs) or 16 Professional Development Hours (PDH)

When will the pulverizer training seminar take place? + –

Hilton Garden Inn Akron
1307 E. Market Street, Akron, OH 44305
(330) 733-2900

What is the registration fee for the pulverizer training seminar? + –

Early bird price $995 USD (ends June 29, 2020)
Advanced price $1,045 USD (ends July 12, 2020)
Onsite price $1,095 USD

What is included in my registration fee? + –

Technical information from industry experts designed to enhance job performance and the overall efficiency
Meals during the seminar (Includes breakfast, lunch, and dinner)
A copy of the 42nd Edition of Steam/its generation and use
Personal seminar binder with copies of all presentations

How do I register? + –

Registration coming soon!

How long is the seminar? + –

The seminar is July 13-16, 2020. Our agenda is still a work in progress.

Does the registration fee include air transportation and hotel accommodations? + –

No. Attendees are responsible for the costs of air transportation and hotel accommodations.

How should I dress? + –

Attendees generally wear business-casual attire (including jeans). We recommend comfortable and appropriate clothing and shoes. Dinners are casual attire.

What is the cancellation policy? + –