Environmental

Allen-Sherman-Hoff® Ash Handling Systems

Solutions for bottom ash, fly ash, and other material conveyance

About B&W’s Allen-Sherman-Hoff® (A-S-H®) Products

B&W is the original equipment manufacturer of all Allen-Sherman-Hoff® (or A-S-H®) ash handling systems, equipment and replacement parts.

Combining our strengths, history and experience, B&W’s extensive knowledge of the physical and chemical properties of various material combinations has made us an integral supplier of customized ash handling solutions.

Each project begins with careful analysis and planning to meet scheduling, execution and performance goals. We also provide dependable after-sales support, with spare or replacement parts, maintenance services, and component and system upgrades to maximize the life of your ash handling equipment.

Our experience and expertise cover a wide range of industries and applications including power generation, renewable power production, waste-to-energy, pulp & paper, refineries, petrochemical, and many others.

Allen-Sherman-Hoff® Ash Handling Systems Parts and Service
Phone: +1-740-687-4160 or toll-free within North America +1-800-848-5086
After-hours Emergencies: +1-800-876-9762

Bottom ash from the combustion of solid fuels

In addition to providing operational and environmental benefits, B&W’s Allen-Sherman-Hoff bottom ash handling systems are a reliable and cost-effective alternative to ash storage ponds. Our bottom ash systems are available in either wet or dry types.

Learn More

Fly ash from economizer/air heater hoppers and particulate collection systems

Allen-Sherman-Hoff fly ash handling systems are a reliable, low maintenance, cost-effective means of conveying and collecting fly ash from a boiler and its emissions control systems. Four basic types of pneumatic transport systems and related components are available depending on your specific application.

Learn More

Replacement parts and performance upgrades

We provide high performance parts and upgrades for our Allen-Sherman-Hoff® line of ash handling equipment, as well as most other brands. Inventory is maintained for a wide range of critical parts, including bottom ash components, fly ash components, and piping and fittings. This means fast delivery of the parts you need most.

Learn More

Fuel conveyors and delivery systems

The reliable, safe and uninterrupted supply of fuel for boilers is essential to power generation. B&W provides a range of solid fuel conveyance and in-feed technologies to transport and process fuel for power, heat and process steam generation. Fuels include coal, biomass, and waste fuels including MSW and RDF.

Reagent and byproduct handling

A-S-H material conveying systems can support the transport, injection, processing and storage of reagents and byproducts of environmental systems, including limestone, lime, sodium, or other sorbents, as well as gypsum byproduct from the wet scrubbing process.

History of Allen-Sherman-Hoff (A-S-H)

1917
1917

Three mechanical engineers, Frank Berry Allen, John Baker and Frank H. Dunbar form the Baker-Dunbar-Allen Company in Cleveland, Ohio. Their goal was to improve coal handling techniques for power plants. In 1921, Frank Allen left for Philadelphia, Pennsylvania, to form a new company with Max Sherman and Leigh Hoff. Together they formed the Allen-Sherman-Hoff Company (A-S-H) and subsequently purchased the equipment drawings and patterns from the Baker-Dunbar-Allen Company.

1920 - 1929
1920 - 1929

Allen-Sherman-Hoff’s business initially consisted of the supply of cast iron hoppers for coal storage and the collection and conveyance of bottom ash below the boilers.

ash handling ad timeline babcock wilcox
1930 - 1949
1930 - 1949

The original arrangement was modified in the early 1930s when A-S-H develops the HYDROSEAL pump, designed to better handle the high abrasive wear of the ash. Its use allowed the collected ash to be carried through pipes at faster conveying rates and farther distance from the boiler.

A-S-H introduces the Hydrovac™ pneumatic vacuum conveying systems for the transport of fly ash to the sluices. A new line of fly ash components is developed to combat the wear of abrasive fly ash moving at high velocities. HYDROVACTOR® vacuum producers and steam jet exhausters provided the required vacuum-induced flows. The hydraulic bottom ash handling system, utilizing the HYDROSEAL pump, dominated the ash handling industry until the introduction of the jet pump which provided improved performance at a lower cost with reduced maintenance.

1950 - 1959
1950 - 1959

A-S-H introduces its complete line of HYDRO-EJECTOR jet pumps in 1952.

1960 - 1969
1960 - 1969

The Allen Family retained control of the company until 1963 when the assets of the ash handling group were purchased by the Baldwin-Lima-Hamilton Company and a new corporation named Allen-Sherman-Hoff, Inc. was formed. This new company operated first as a subsidiary, then as a division, of Ecolaire Incorporated.

ash pugmill 3600 old babcock wilcox
1970 - 1979
1970 - 1979

Ecolaire establishes the offices of A-S-H in Malvern, Pennsylvania.

A-S-H successfully negotiates the technology transfer contract with the People’s Republic of China, establishing A-S-H’s dominance of the ash handling industry in the PRC. A-S-H was also awarded the two largest ash handling system contracts ever tendered at that time, both for Taiwan Power Company’s Taichung Station.

Allen-Sherman-Hoff advances its technology development in dilute-phase transport systems, pressure dense-phase transport systems and mechanical drag conveyors.

1987
1987

Allen-Sherman-Hoff acquires HydroAsh from the L. B. Foster Company of Pittsburgh, Pennsylvania. At the time of this acquisition, HydroAsh had established itself as the third largest ash handling equipment supplier in the United States. Under Allen-Sherman-Hoff, the HydroAsh group targeted the industrial ash handling market, its strongest niche. Eventually the design strengths and products of HydroAsh were assimilated within A-S-H’s product offerings.

In late 1987, Ecolaire merges with Joy Manufacturing Company. A-S-H’s operations were combined with Western Precipitation (WP), another Joy unit, forming Joy Environmental Technologies, Inc. The product offerings of this new company included A-S-H’s ash handling equipment and WP’s air pollution control equipment.

1995
1995

Anticipating a synergy with its highly successful sootblower and auxiliary boiler equipment business, Diamond Power Specialty Company (DPSC), part of The Babcock & Wilcox Company (B&W), acquires the assets of Joy Environmental.

Allen-Sherman-Hoff was established as a division of DPSC for the supply of traditional ash handling systems, equipment and parts, while the Western Precipitation air pollution control equipment was joined under B&W’s environmental technologies group.

2002
2002

Diamond Power International, Inc. (DPII) acquires certain assets of the Beaumont Birch Co., establishing Allen-Sherman-Hoff as part of DPII’s ash handling division.

2016
2016

As part of a company-wide strategy to integrate operations and emphasize its complete and broad power plant capabilities, B&W realigns the Allen-Sherman-Hoff operations under the B&W company brand, marketing all ash handling systems, products, parts and upgrades with the Allen-Sherman-Hoff® (A-S-H®) product brand.

ash handler parts history babcock wilcox