B&W Products

FPS Oil Ignitor

Use this quick guide to learn more about the vital parts of the FPS Oil Ignitor. Hover over the numbers. 

FPS Oil Ignitor

Combustion / Cooling Air Regulating ValveOil and air connectionsOil and Air ConnectionsSpark Rod ConnectionSpark Rod ConnectionOil Atomizer AssemblySeal Air ConnectionFlame Detection RodEddy PlatePAI Spark ProbeStationary Guide Tube

Combustion/Cooling Air Inlet

Supplies combustion/cooling air to the igniter

Eddy Plate

Provides proper mixing of the combustion air and fuel for
reliable ignition and flame stability

Flame Detection Rod 

Integral flame detection for igniter; high temperature
extension with removable flame rod

Oil and Air Connections

Positive shut-off quick disconnects allow easy maintenance,
while 1/4 in. oil and 3/8 in. air connections prevent
accidental switching

Oil Atomizer Assembly

SST construction, produces a finer spray, reduces particulate
and opacity emissions, minimizes atomizer plugging

PAI Spark Probe

High temperature extension with removable spark plug

Seal/Aspirating Air Connection (pressure-fired units only)

Seal air chamber allows removal of the spark and flame rods
and the oil atomizer

Spark and Flame Rod Connections

Flexible conduit connections allow removal of the flame and
spark rods without electrical disconnects

Stationary Guide Tube

Stationary guide tube with stainless steel end mounts easily
into the burner

FPS Oil Igniter

  • Capacity:  4 to 20 million Btu/hr
  • Oil viscosity:  32 to 45 SSU (#2 oil)
  • Oil pressure:  40 to 120 psi
  • Atomizing air: 75 psi minimum; 85 to 90 psi desired
  • Combustion air: 80 to 200 SCFM @ 2 to 6 in. above furnace

Flame detection – Sunspot

  • Input: 120 VAC, 1/8 amp
  • Output from two form C relay contacts:
    • 5 amp @ 30 or 120 VAC (resistive)
    • 3 amp @ 120 VAC (inductive)

Plasma arc ignition

  • Input: 120 VAC, 50/60 Hz, 100 VA
  • Output energy: 8 joules @ 3 arcs/sec

Ignitor Upgrade Success Story

AEP Amos Plant

American Electric Power (AEP) Amos Power Plant, West Virginia, USA

When plant operators observed that the unit could not light off, they called upon Babcock & Wilcox (B&W) to help assess the condition of the ignition equipment and develop a plan to refurbish it to safe, reliable operation.