Mitchell Station Units 1 and 2
Wet Flue Gas Desulfurization Systems

American Electric Power
Moundsville, West Virginia
The wet flue gas desulfurization (FGD) system from Babcock & Wilcox (B&W) features a combination of design components to provide a high level of reliability and removal efficiencies. These include B&W’s signature tray tower design that provides excellent gas to liquid contact and uniform flow distribution through the absorber spray zones; its patented inlet awning; interspatial headers to reduce absorber height, pump power requirements, and internal support costs; forced oxidation system; and advanced mist eliminators.
Boiler/Plant Information
  • 2 x 800 MW
  • Boiler type: Pulverized coal fired
  • Design fuel: Bituminous
  • Additional environmental equipment: Electrostatic precipitator (ESP), selective catalytic reduction (SCR) system, and a trona injection system for SO3 control.

Project Summary

  • Engineering, procurement and construction of a wet flue gas desulfurization system
  • System designed to remove 98% of the entering SO2 without organic acid addition
  • Type: Limestone forced oxidation with gypsum byproduct
  • Project awarded: March 2004
  • Operation dates: January 2007 (Unit 2) and April 2007 (Unit 1)

B&W Scope

  • Two (2) wet FGD absorbers (1 per boiler)
  • Two (2) limestone milling systems (1 operating, 1 spare)
  • Gypsum dewatering system that includes three (3) horizontal table filters (2 operating, 1 spare)
  • Buildings and structural steel
  • Construction of all B&W supplied equipment and structural steel, through Babcock & Wilcox Construction Co., Inc. (BWCC), a B&W subsidiary At the time of contract signing, these absorber tower modules, at 68.5 ft (20.9 m) in diameter, were the largest shop-assembled FGD modules B&W has ever designed and built.

The project met every engineering, fabrication and construction schedule milestone. The commissioned units have met performance guarantees.

Mitchell 1 and 2 - 800 MW each

New Build

We consistently demonstrate the ability to successfully execute innovative solutions for our customers, from new equipment to large, complex full-scope engineering and construction projects.

Upgrades / Retrofits

Modifying, improving and maintaining existing equipment are vital considerations for the long-term viability and profitability of all operations.

Parts / Services

An extensive network of worldwide regional service centers, field service engineers and technical support personnel are available to provide the customized service and aftermarket solutions for your requirements.