AG Processing CFB Boiler

AG Processing Inc.
Hastings, Nebraska

Plant Owner
AG Processing Inc.

Location
Hastings, Nebraska

Contract Order: 2006

Commercial Operation: 2009

B&W Scope

  • Coal-fired internal recirculation circulating fluidized-bed (IR-CFB) boiler from outlet of coal bunkers to outlet of tubular air heater including:
  • FD fan and motor
  • Tubular air heater
  • Steam coil air heater
  • Multi-cyclone dust collector
  • Ash recycle/reinjection system
  • Limestone injection system
  • Coal feeding system
  • Start-up burners
  • Refractory lined lower furnace with erosion protection at the Reduced Diameter Zone (RDZ) transition
  • Segmented U-beam primary particle collectors with watercooled support system
  • Bed drain screw coolers
  • Bed drain solids conditioning equipment including a screener and crusher
  • Sootblower boiler cleaning system.
  • Attemperator and spray water control station
  • Flues and ducts
  • Ammonia forwarding, control and injection system
  • Instrumentation
  • Technical advisory services during startup and commissioning

Boiler Specifications

  • Boiler type: Internal recirculation CFB design
  • Design fuel: Powder River Basin coal
  • Startup fuel: Natural gas
  • Steam flow: 311,000 lb/h (37.8 kg/s)
  • Steam pressure: 150 psig (1034 kPa)
  • Steam temperature: 440F (227C)

Environmental Equipment

Project/Boiler Facts

  • Low pressure and temperature steam from the boiler is supplied primarily for soy bean processing.
  • The addition of limestone to the circulating bed reduces SO2 emissions from the boiler.
  • Low furnace temperatures, staged combustion and SNCR system limit NOx emissions.
  • Unique two-stage solids collection system using U-beams and multi-cyclone dust collector (MDC) provides superior collection efficiency. The recycling of solids collected by the MDC improves combustion efficiency and limestone utilization.
  • The U-beam and MDC solids collection system requires significantly less maintenance than hot cyclones.
  • A patented RDZ design with silicon carbide tiles at the top edge of the furnace refractory is used to minimize tube erosion at the interface

Sectional Sideview of the AG Processing CFB boiler.

Hover and click on the numbered image shown below to learn more!

Sectional sideview of the AG Processing CFB boiler


Coal Silo

Division Wall

Economizer

Generating Bank

Limestone Silo

Multi-Cyclone Dust Collector

Overfire Air

SNCR Injection Nozzles

Solids Recycle System

Steam Drum

Tubular Air Heater

U-Beam Primary Particle Collectors

Wing Wall

New Build

B&W Projects New Build
We consistently demonstrate the ability to successfully execute innovative solutions for our customers, from new equipment to large, complex full-scope engineering and construction projects.

Upgrades / Retrofits

Upgrades and Retrofits by B&W
Modifying, improving and maintaining existing equipment are vital considerations for the long-term viability and profitability of all operations.

Parts / Services

Babcock & Wilcox Parts and Service Support
An extensive network of worldwide regional service centers, field service engineers and technical support personnel are available to provide the customized service and aftermarket solutions for your requirements.